sensor

Rotary Encoder G40B-6-400-2-24

 

 

Rotary Encoder G40B-6-400

Rotary Encoder G40B-6-400

 

Manualnya tersedia di http://www.coron.com.cn/En/products.asp?cid=699&flg=11

Arti dari tipe tersebut menuru situs Coron:

  • G40: diameter luar 40 mm
  • B:
  • 6: diameter poros 6mm
  • 400: resolusi 1 putaran
  • 2: jumlah fase output A/B
  • 24: Tegangan kerja dari 8 volt sampai 30 volt

Keterangan menurut artikel di ebay:

Features :
400 p/r (Single-phase 400 pulses /R,Two phase 4 frequency doubling to 1600 pulses)
Power source: DC5-24V
Shaft: 6*13mm/0.23*0.51″
Size: 38*35.5mm/1.49*1.39″
Output :AB 2phase output rectangular orthogonal pulse circuit, the output for the NPN open collector output type
Maximum mechanical speed: 5000 R / min
Response frequency: 0-20KHz
Cable length: 1.5 meter
Notice:AB 2phase output must not be directly connected with VCC, otherwise, will burn the output triode
Because different batches, and may not have the terminal

Package included: 1 X Incremental Rotary Encoder

Connection:
Green = A phase, white = B phase, red = Vcc power supply, black = V0
Application:
Is used to measure the rotational speed, Angle and acceleration of the object and the length measurement
Suitable for intelligent control of various displacement measurement, automatic fixed-length leather automatic guillotine machines, steel cut length control, civil measured height human scale, Students racing robots

Notice:
1.Please allow 1-3mm error due to manual measurement.
pls make sure you do not mind before you bid.
2.The colors may have different as the difference display,pls understand.

Keterangan menurut situs mechashop

Performance: 400 pulses per revolution.
Working voltage : 24VDC
Maximum mechanical speed of 1000 rev / minute
Dimensions: the encoder body size: | O~; 38mm; shaft &O-;6 x 13mm; axis platform: high-5mm Ø 20 mm; fixing holes: M3 screws, three mounting holes round of 30, three mounting holes in round 28; side of the outlet.
Output: the output circuit NPN open collector output type; pulse of A, B two-way;

Wiring: Vcc positive supply, 0V to A-phase, B-phase, shielded cable.
Degree of protection :; IP54
<div>Model: 400P / R incremental rotary encoder, AB two-phase. Can identify the direction of the count pulse signal generated by the rotation of the grating disc and optocoupler
<div>&nbsp; &nbsp;Performance: 400 pulses per revolution. Working voltage :5-24V, maximum mechanical speed of 1000 rev / minute Dimensions: the encoder body size: | &Otilde; 38mm; shaft &Oslash;6 x 13mm; axis platform: high-5mm &Oslash; 20 mm; fixing holes: M3 screws, three mounting holes round of 30, three mounting holes in round 28; side of the outlet.
Output: the output circuit NPN open collector output type; pulse of A, B two-way;
Wiring: Vcc positive supply, 0V to A-phase, B-phase, shielded cable.
Note: AB two-phase outputs must not be connected directly to the power supply VCC, otherwise, they will burn the output transistor.
VCC ………….RED
0V………………BLACK
A ……………….YELLOW
B ……………….GREEN
F.G ……………shielding

Referensi:

  • http://www.coron.com.cn/En/products.asp?cid=699&flg=11
  • http://www.ebay.com/itm/400P-R-Rotary-Encoder-6mm-Incremental-Optical-Shaft-Working-Measurement-5-24V-US-/361402482978
  • http://mechashop.weloveshopping.com/store/product/view/%E0%B9%80%E0%B8%AD%E0%B9%87%E0%B8%99%E0%B9%82%E0%B8%84%E0%B9%89%E0%B8%94%E0%B9%80%E0%B8%94%E0%B8%AD%E0%B8%A3%E0%B9%8C_Incremental_optical_rotary_encoder_400_pulse_24VDC-26240951-th.html

 

Leave a Reply

Your email address will not be published. Required fields are marked *

Powered by: Wordpress