komponen

Instrumentasi Air

Jika kita ingin membuat sistem kendali air, maka ada beberapa komponen yang diperlukan (tergantung sistem yang dibuat):

  • Sensor ketinggian air
  • Sensor aliran air / flowmeter
  • Pompa air
  • Katup / valve

Untuk sensor ketinggian on-off mudah didapat di toko bahan bangunan. Jika kita ingin ketinggian air secara detail agak sulit, dan harga sensornya agak mahal.

Pompa air mudah juga didapat di toko bahan bangunan.

Katup/valve agak sulit didapat, mesti dicari di toko khusus industri, misal di daerah Cikapundung di kota Bandung

Sensor aliran air juga lumayan susah didapat.

Berikut ini beberapa komponen instrumentasi air yang ada dijual secara online:

Flowmeter  YF-S203 1/2″ Water Heater Flow Transducer Meter – Black

Flowmeter

Flowmeter

Brandwu
ModelYF-S203
Quantity1
ColorBlack
MaterialPVC
SpecificationMinimum voltage: DC4.5 5V~24V; Maximum current: 15 mA (DC 5V) ; Working voltage: DC 5~18 V; Load capacity: 10 mA(DC 5V); Temperature range: 80’C; Humidity: 35%~90%RH(no frosting condition); Water gage: below 1.75Mpa; Storage temperature: -25~+ 80’C; Storage humidity: 25%~95%RH; Frequency: F=7.5 x Q(L/Min); Error: ±2%; 1L water for 450 output pulse; Flow range: 1-30L/min; Minimum/maximum voltage: 4.5V/24V.
FeaturesWater flow sensor is mainly composed of plastic body, the flow of rotor components and hall sensor. It is placed in the water heater inlet, used to detect water flow, when the water through the water flow rotor components, magnetic rotor rotation and speed changes with the flow, hall sensor output pulse signal, the corresponding feedback to the controller, the controller to judge the size of the water flow, adjust and control.
ApplicationSuitable for water heater, imprinter, SHXRO and other flow metering device.
OtherNo violent impact and chemical erosion to the product. Vertical installation, do not tilt more than 5 degrees. Medium temperature should not be more than 1200’C.
English Manual/SpecYes
Packing List1 x Flow transducer

Dimensions: 2.28 in x 1.57 in x 1.53 in (5.8 cm x 4 cm x 3.9 cm)
Weight: 1.52 oz (43 g)

Flowmeter  HS01 High Precision Flow Meter – White + Black

Flowmeter

Flowmeter

BrandN/A
ModelHS01
Quantity1
ColorWhite + black
MaterialPVC
SpecificationMinimum rated working voltage: DC 5~24V; Max. working current: 15mA (DC 5V); Working voltage range: DC 5~18V; Load capability: <= 10mA (DC 5V); Working temperature: <= 80’C; Humidity range: 35%~90%RH (no frost); Water pressure: <1.75Mpa; Storage temperature: -25~80’C; Storage humidity: 25~95%RH; Flow range: 1~5L/min’; Frequency: 4380 pulse for 1L through the sensor
FeaturesLightweight, Small in size, Easy to install; With stainless steel axis in the wheel, abrasion resistant; Sealing ring design to prevent water leaks; Compliant with RoHS standard
ApplicationSuitable for water heater, POS terminal, automatic water dispenser etc.
OtherInstallation direction: Vertical (inclination should not exceed 5 degrees)
English Manual/SpecN/A
Packing List1 x Flow meter (17cm-cable)

Dimensions: 2.28 in x 1.38 in x 1.06 in (5.8 cm x 3.5 cm x 2.7 cm)
Weight: 1.02 oz (29 g)

 

Leave a Reply

Your email address will not be published. Required fields are marked *

Powered by: Wordpress